Versions
NetworkDevices Versions
Devices based on TCP/IP network communication
NetworkDevices documetationConSys Projects Versions
This document is generated by CsDocVer 18-12-2024 - 14:36
Version: 1.48.837.48 (TW - 2024-11-11):
New features:
- CDeltaPSbaseDevice: Sending current program source to supply => Power off if was on. Problem when initialising from DevToSupply. - elog entry 2886
Version: 1.48.822.47 (TW - 2024-10-09):
Correted bugs:
- CDeltaPSbaseDevice - Creating a new Ramp sequence did not use correct startup values (number of supplies was 1 and not 5) - elog entry 2865
Version: 1.47.783.46 (TW - 2024-08-27):
New features:
- Initial release with sequences - elog entry 2823
Version: 1.47.782.45 (TW - 2024-08-21):
New features:
- CDeltaPSbaseDevice - Sequencer suppor almost finishedt - elog entry 2823
Version: 1.47.777.44 (TW - 2024-08-09):
Correted bugs:
- Program source not supported by PCH_ETH. Avoid these commands for PCH_ETH - elog entry 2839
Version: 1.47.767.43 (TW - 2024-07-10):
Version: 1.47.758.42 (TW - 2024-06-12):
New features:
- Changed Debug setting in property sheet ConSysUni and ConSysUniX64 - elog entry 2812
- New device for new Septum supply: SM 70-CP- 450, Device CDeltaPsSM15KDevice - elog entry 2813
Version: 1.47.680.41 (TW - 2023-12-18):
Correted bugs:
- Some CRohdeSchwarzSMB100A units rather often loose connections - elog entry 2705
Version: 1.47.518.40 (TW - 2023-01-10):
Correted bugs:
- Add all neccesay initialization code in AMO undulator device - elog entry 2250
Version: 1.45.397.39 (TW - 2022-05-18):
Correted bugs:
- CSiglentSDG10x2X - Clear IDN string on Invalidate, Set state ok when correct IDN string received - elog entry 2428
Version: 1.45.392.38 (TW - 2022-05-04):
Version: 1.45.385.37 (TW - 2022-04-25):
New features:
- CDeltaPSbaseDevice - added power and resistance calculation - elog entry 2412
Version: 1.45.382.36 (TW - 2022-04-22):
Correted bugs:
- CDeltaPSbaseDevice - Changed protection code - elog entry 2409
Version: 1.45.379.35 (TW - 2022-04-19):
New features:
- BMH608 notes added
Version: 1.45.377.34 (TW - 2022-04-13):
New features:
- DELTA Elektronika power supplies - release candidate - elog entry 2213
Version: 1.45.375.33 (TW - 2022-04-05):
New features:
- New Network device for the Delta Elektronika power supplies - elog entry 2213
Version: 1.45.345.32 (TW - 2022-01-20):
Correted bugs:
- Fix of various issues reported by VC2022 intillisence - elog entry 2360
Version: 1.44.286.31 (TW - 2021-10-28):
New features:
- CRohdeSchwarzSMB100A: Changed AM:Depth:Lin command to also suit the SMC100A generator
Correted bugs:
- Frequency jump in CRohdeSchwarzSMB100A device - elog entry 2168
Version: 1.40.1702.30 ( - 2019-06-26):
New features:
- SPCe set/read of MaxCurrent
- New device for Siglent SDG10x2X function generator - elog entry 2018
Version: 1.39.1630.29 ( - 2019-01-03):
Correted bugs:
- Gamma Vacuum SPCe device cannot set setpoint state in FW 1.18.03 - elog entry 1996
Version: 1.39.1629.28 ( - 2019-01-02):
New features:
- Additions to the R&S SMB100A device - elog entry 1997
Version: 1.39.1598.27 ( - 2018-09-07):
Changes update timing in devices
Version: 1.39.1598.26 ( - 2018-09-06):
New features:
- Changed update timing in CGammaVacSPCEthDevice - elog entry 1973
Version: 1.39.1592.25 ( - 2018-08-24):
CGammaVacSPCEthDevice - communication fails after firmware update
Version: 1.39.1550.24 ( - 2018-02-22):
Correted bugs:
- NetworkCalcDevice based devices, possible thread lock? SendNextCommand() can make ConSys connections not responding. in ISCAMOUndulatorDevice, OH6, I1: No new connections could be made and no data being returned from ISAOH6. - elog entry 1932
Version: 1.39.1476.23 ( - 2017-10-09):
New features:
- New Device for our Agilent 34980A Multiplexer - elog entry 1893
Version: 1.37.1370.22 ( - 2017-02-09):
New features:
- CRohdeSchwarzSMB100A: (also) posibility of editing the outFrequency - elog entry 1787
Version: 1.34.1155.21 ( - 2016-02-10):
Correted bugs:
- CRohdeSchwarzSMB100A: Does not always start communication in release - elog entry 1579
Version: 1.34.1043.20 ( - 2015-09-28):
Correted bugs:
- GammaVacuum TSP VPS421 controller does not communicate
Version: 1.34.1038.19 ( - 2015-09-24):
New features:
- CRohdeSchwarzSMB100A: New device for Rohde & Schwartz SMB100A Signal generator - elog entry 1535
Version: 1.34.1019.18 ( - 2015-08-18):
Correted bugs:
- Setting the control bits (HVPS and SetHV) often fails when set from Ast2ElOp device
Version: 1.33.898.17 ( - 2014-08-07):
New features:
- SPC device: Addition of control bit for foldback - elog entry 1402
Version: 1.33.869.16 ( - 2014-04-22):
Correted bugs:
- TSP device, firmware version 05.07.06 - update of resisistance and Degass max not working after firmware update
- TSP device: clearAllFilament, not cleared after pressed
Version: 1.33.867.15 ( - 2014-04-15):
Correted bugs:
- GammaVacTSPEthDevice: TSP2 has invalid current, time, and filament after device restart - elog entry 1379
Version: 1.33.833.14 ( - 2014-02-06):
Correted bugs:
- CGammaVacTSPEthDevice - Answer from TSP configuration has changed in firmware version 05.07.05
Version: 1.33.789.13 ( - 2013-12-03):
New features:
- CGammaVacTSPEthDevice: Registration of Max Voltage and Current and calculation of resistance during a sublimation - etc - elog entry 1168
Version: 1.33.789.12 ( - 2013-11-27):
New features:
- TSP: Implement add of filament use - elog entry 1311
Version: 1.31.651.11 ( - 2013-01-24):
New features:
- GammaTSP device: Support for 1x3 filament - elog entry 1145
Correted bugs:
- GammaSPC controller: - sometimes does not reconnect automatically after communication failure - elog entry 1017
- Gammavac SPCe could not communicate with negative HV versions of controller
Version: 1.31.570.10 ( - 2012-05-10):
Correted bugs:
- CGammaVacSPCDevice: Missing last char in status read string - elog entry 1096
Version: 1.31.553.9 ( - 2012-04-18):
Correted bugs:
- Filament selection not set at start of firing - elog entry 1038
Version: 1.31.507.8 ( - 2012-01-02):
Correted bugs:
- Gamma Vac. TSP device can enter a mode where the communication is out of sync - elog entry 1037
Version: 1.31.489.7 ( - 2011-10-06):
Correted bugs:
- CGammaVacSPCEthDevice - Error during device initialization after upgrade to firmware version 1.13.00 - elog entry 1016
- Setting of new unit is not working always - in some cases goes back to prev. value. - elog entry 1018
- The communication sometimes fails with timeout during send. - elog entry 1019
Version: 1.31.431.6 ( - 2011-05-11):
Correted bugs:
- CGammaVacSPCEthDevice - Can not set Set Point on/off/enable after upgrading to firmware version 1.12.03 - elog entry 951
Version: 1.31.427.5 ( - 2011-05-09):
Correted bugs:
- Communication sometimes messed up - send and receive commands was not in sync. - elog entry 950
Version: 1.31.427.4 ( - 2011-05-05):
New features:
- New device: Gamma vacuum TSP sublimation pump controller - elog entry 948
Version: 1.31.409.3 ( - 2011-03-09):
New features:
- Added new device for GammaSpec Small Ion Pump Controller
Version: 1.31.402.2 ( - 2011-02-03):
Started project, Initial 'working' checkin
Version: 1.31.402.1 ( - 2011-02-03):
Initial checkin
Last Modified 18 December 2024